Entstapeln EN Destacking

Separation of single and multiple packages

High performance and a high cycle rate

TILT DESTACKING

For separating single and multiple packages with and without intermediate sticks upstream of planing and sorting systems. The packages are received in a transverse direction by a lifting unit, pivoted through approx. 45° and conveyed on to the skid edge. Layer by layer, the timber pieces now slid over a skid edge (which can be flexibly adjusted) to even out distortions in the layer.

Entstapeln_Kippenstapelung

Minimising setup times

TILT DESTACKING OF DOUBLE PACKAGES

Tilt destacking of double packages can halve setup times, minimising production costs as a result. The intermediate strips in double packages can be removed with the aid of a stick stripper (optional) and collected and sorted for further use or disposal.

Entstapeln_Kippentstapelung_Mehrfachpakete

Careful and gentle at a medium cycle rate

VACUUM DESTACKING

Vacuum suckers lift the topmost layer of a package and deposit it gently in a transverse direction on the conveyor. This careful handling is particularly suitable for avoiding surface damage to planed workpieces. The vacuum destacker is suitable for production lines with short to medium cycle rates.

Longitudinally and transversely at a low cycle rate

PUSH-OFF DESTACKING

This destacking involves pushing the uppermost layer of a package to the downstream process. Pushing can occur in a transverse or longitudinal direction, depending on the space requirement. This destacker is used on production lines with a low cycle rate.

Entstapeln_Kippentstapelung_Abschiebeentstapelung