Vereinzeln EN Unscrambling

Controlled and gentle with material

Controlled timber sorting

UNSCRAMBLING WITH AND WITHOUT SINGLE FEED UNIT

Immediately after a sawing line or tilt destacking, it is often necessary, to separate the workpieces that arrive in a batch in order to form a material film/carpet from which they are then transferred individually or in layers to the next processing step. Depending on the required number of pieces and the material cross-sections, different technologies are used for separation or layer formation.

Vereinzeln

Stapeln mit Umreifen EN Stacking with strapping

Time-saving process solutions

Fully automatic material flow

STACKING: Shipping packages

Stacking of timber (including in multiple lengths) can be realised with placement forks or vacuum lifters, with the timber being collected in layers and deposited layer by layer on the shipping package to be formed. Dispatch strips can be laid between several layers to stabilise the shipping package. Strip laying is automatic. Where necessary, the shipping package is stabilised additionally through final strapping. Squared timbers can be optionally included on the package underside, and the packages can be pressed hydraulically together if desired. Customers who do not wish to have stabilising strips (e.g. because the package only needs to be transported within the company) may avail of offset stacking.

Stapeln-Versandpaket

Effective air circulation, thanks to dry sticks

STACKING: Kiln packages

Wooden sticks are laid between each layer when stacking timber that is still damp in kiln packages. The intermediate sticks ensure adequate air circulation during drying and accelerate the drying process. The drying sticks are laid by stick magazines.
Option: Workpieces of different widths can also be stacked with spacing with the aid of a servo slide.

Stapeln-Trocknung

Bündeln EN Bundling

Greater stability during handling

BUNDLING: Sticks and boards

Bundling involves the joining of individual timbers to form a compact bundle. Bundles are easier to handle and have a greater degree of stability. This is a major advantage when, for example, stacking or during transportation. Between 8 and 11 bundles can be automatically strapped every minute, depending on the bundle dimension. A labelling option is available, either on individual boards or on the complete timber bundle.

Bündeln

Beschicken EN Feeding

Continuity at high speed

High throughput

FEEDING: Multiple cross-cut saws

Workpieces can either be fed individually to the multiple cross-cut saw with the aid of a single feed unit or in entire layers, ensuring a constant material flow at even a high production speed.

Beschicken_Mehrfachablaengsaege

Mehrfachablängen EN Multiple cross cutting

Flexible and efficient

The ends of raw or planed timber workpieces are cut with millimetre accuracy to the desired fixed lengths in cross-cut saws. The workpieces can be processed individually or layer by layer. Powerful saw motors and feed speeds of max. 50 m/min ensure a high throughput.

Several cutting programs can be stored to ensure maximum production flexibility, or data can even be imported from ERP systems and master computers.

Ablaengsaegen_Mehrfachablaengen